Branch Chipping North Shore, Auckland
Arborist North Shore chips branches, prunings and storm debris on site across Auckland's North Shore, using our own chipper and taking every load of chip away. It suits the pile left after a weekend of pruning in Birkenhead, a fallen limb across a Devonport lawn, or a whole section of cut scrub before building in Greenhithe. Branches go through on the day and the drive is swept before we leave. Our qualified, insured crew have more than 20 years of North Shore tree work behind them.
Burning garden waste is not allowed anywhere in Auckland's urban area, so for most homeowners the choice is trailer trips to a transfer station or having it chipped where it lies. At a free site visit we look at the size of the pile, the thickest branches and how close the truck can park, then give you a written price. Call 09 888 0539 to book a chipping visit.
Branch Chipping Services on the North Shore
Garden Pruning Pile Chipping
We chip the branch piles homeowners build up after pruning, trimming or a garden makeover. A heap that would take several trailer loads to the tip is chipped in a fraction of the time, and the chip leaves with us.
Stack the branches with the cut ends facing the same way if you can. It speeds up feeding, which keeps the job shorter.
Chipping After Tree Work
Chipping is built into every removal and pruning job our arborists do, so branches never sit on your lawn overnight. Where another crew or a landscaper has left the cut material behind, we come in for the chipping alone.
Tell us roughly how much there is and what was cut. Palm fronds and flax are fibrous and feed differently, so they are planned for separately.
Storm Debris Chipping
Our crew clear and chip the broken limbs and blown-down branches a storm leaves across driveways and lawns, often as the second visit after an emergency make-safe. Wet branches on a sloping North Shore drive are a slip hazard, so clearing them quickly matters.
Chipping can be part of the emergency call-out or booked for the next dry day, whichever suits you.
Scrub and Section Clearing Chipping
Developers and owners clearing a section before building get us to chip the cut scrub, gorse, wattle and small trees on site. Chipping saves truck loads of whole branches going to a transfer station, and keeps the site tidy for the surveyor.
Scrub chips faster when it is cut and stacked first. On larger sites that cutting is done by the same crew, the day before.
How Branch Chipping Works on Your Section
| Step | What happens |
|---|---|
| Step 1. Free site visit | We check the pile, the thickest branches and where the chipper and truck can park. |
| Step 2. Written quote | A price for the job, with taking the chip away included. |
| Step 3. Set-up | The chipper is parked on the drive or street with cones out, and the work area is kept clear. |
| Step 4. Chipping | Branches are fed butt-first, and anything too thick for the chipper is cut to length or taken as logs. |
| Step 5. Clean-up | The last twigs and leaves are raked up, every load of chip goes with us, and the drive is left clear. |
Get a Free Branch Chipping Quote on the North Shore
Free consultation and site visit, then a written quote before anything is cut. Qualified, insured arborists, available 24/7 across the North Shore. Call 09 888 0539.
Branch Chipping Prices on the North Shore
| Job | Price guide (excl. GST) |
|---|---|
| Chipping added to our own tree work | $90 to $350 per job |
| Small garden pile, standalone visit | $150 to $350 |
| Larger piles, crew and chipper by the hour | $200 to $450 per hour |
| Storm debris clearance and chipping | Quoted per job |
These prices are before GST and give a guide until we have seen the pile. Taking the chip away is included. Small piles sit at the top of their band because the chipper, truck and two people cost the same to bring out for twenty minutes as for an hour. The written quote after the site visit sets your price.
What Moves the Price of Branch Chipping
- Size of the pile
- Thickness of the largest branches
- Distance between the pile and where the chipper can park
- Whether the branches are stacked or tangled
- Fibrous or thorny material such as palm fronds, flax and gorse
- Steps, slopes or narrow paths on the carry route
Why Our Chipping Service Suits North Shore Sections
Our own chipper
We own the chipper, so a chipping visit is not waiting on hire.
Chip taken away
Every load leaves with us. Nothing is left for you to spread or bag.
No burning needed
Urban Auckland bans burning garden waste, and chipping on site is the clean alternative.
Qualified arborists
The same crew can cut, prune or remove the trees that made the pile.
Public liability insurance
We carry cover for work on driveways, footpaths and the street frontage.
20+ years on the Shore
More than 20 years and over 1,000 trees worked on across the North Shore.
Green Waste Rules and Disposal on the North Shore
Green waste is one of the few garden jobs on the North Shore with a clear rule attached. Auckland Council's outdoor fire rules say you cannot burn rubbish or garden waste in the urban area, which covers all residential and business land. On the Shore that means every section from Devonport to Albany.
That leaves two options for most North Shore homes. Auckland Council's community recycling centres and transfer stations take green waste in many cases, which works for a car boot of prunings and gets slow for anything bigger. Chipping on site turns the same pile into a few loads of chip in one visit, and we cart it off.
Kauri material is handled differently. Rule E15 of the Auckland Unitary Plan requires kauri material to stay within three times the radius of the tree's dripline, or go to an approved landfill. In the bush-backed parts of Kaipātiki, Beach Haven and Greenhithe, kauri branches are kept out of the general chip load and dealt with to that rule, and the chipper is cleaned of soil before it leaves.
Chipping often follows a removal or a big prune by our North Shore tree removal team, and the timing usually runs in one visit. Where the pile has come from another contractor or your own weekend work, we book it as a chipping job on its own. Tell us who cut it and roughly when.
Palms and flax are the other material that changes the plan. Their fibres wrap around the chipper's rollers, so they are cut short and fed slowly, and a boundary planted out in cabbage trees or nikau along a Takapuna or Milford section takes longer to clear than the same pile of pine. Tell us what the pile is made of when you call, and the visit is booked for the right length.
Branch Chipping Reviews from North Shore Customers
Branch Chipping FAQs
How much does branch chipping cost on the North Shore?
Most chipping jobs cost between $150 and $350 excluding GST for a standalone garden pile. Larger piles are charged by the hour for the crew and chipper, between $200 and $450 an hour. Taking the chip away is included.
Can I burn my garden waste instead?
What happens to the chip?
How thick a branch can you chip?
Can you chip prunings from a kauri?
Which North Shore suburbs do you cover for chipping?
Book Your North Shore Branch Chipping Visit
Arborist North Shore. Phone 09 888 0539, answered 24 hours a day. We work across the whole North Shore, from Devonport and Takapuna to Albany, Glenfield, Birkenhead, Hobsonville and the East Coast Bays.
